Johnson
Irrigation - Pipe pulling, vibratory plow, pipe, wire, cable installation Montreal
The speed at which we are able to install pipe and wire can save not only your property, but money as well. Our equipment enables us to install pipe, cable, conduit or wire up to 2' deep without damaging your property. All this can be performed at speeds of up to 200' per minute.
Our vibrating plows make a small cut (1/2") in the ground and pull or insert the wire and pipe underground. All this is accomplished without disturbing the ground or grass so there are no repairs required after the installation.
Depending on the condition of your lawn, these lines may be undetectable by the end of the day.
How long it would take to do this by hand? First the grass would have to be removed, then digging and installing the pipe or wire followed by filling in the trench. Replace the grass and rake up any leftover dirt. For a 50' trench, this could easily be 4 hours of labor intensive work. For us, it would take about 15 minutes and there would be no damage to the lawn.
Please follow this link to book an APPOINTMENT.
With 3 different machines, we have a machine to match any size of job. No job is to big, no job is to small. Clients who have made use this service consist of:
Questions or problems regarding this web site should be directed to postmaster@johnsonirrigation.com
Copyright © 2003 Johnson Irrigation Inc. All rights reserved. Last modified: 04/29/2008